Thistle the shop i bought the chains from never uses the 10 tilt angle. To modify the above chain you choose a tooth and file it to 0 degrees straight across and only take off enough to get the tooth angle changed to 0 degrees.
Chain Saw Tooth Modifications For Ripping
27rx173g Oregon 404 Ripping Hyper Skip Chainsaw Chain 404 Pitch 173 Dl
Amazon Com Superior Steel Ss1214 11 5 Inch Chainsaw Attachment For
The file should also be tilted down about 100.
Chainsaw ripping chain angle. When sharpening this chain the top plate filing angle should be 100 150. All stihl ripping chains are filed to 10 degree angle. Chain saw tooth modifications for ripping.
However when using a chain saw for milling lumber the saw will be ripping which is cutting parallel to the grain of the wood. Tooth angles for ripping reply 5 on. Sharpening angle of ripping chain.
The good thing is i have always sharpened the ripping chains from the start thanks to some help from smokin this site. Measure the length of this modified tooth with calipers or adjustable wrench then file all the teeth to the 0 dgree angle and the same length. The bar i use the most is 42 long and has 123 drivers and after the ends are joined together i set up the die grinder and start at the joint.
November 13 2011 081915 pm theres a trick to ripping with a regular chisel chain attack the wood at an angle which pulls long chips but not so long as to clog the clutch guard itll come out just as smooth as so called rip chain and be done a whole lot quicker. How to make a ripping chain for a chainsaw. So what saw are you going to mill with.
The angle of the cutting teeth on a ripping chain is much more square than on a standard chain. Fortunately you can make a ripping chain for a chainsaw out of a standard chain with some sharpening tools. All oregon ripping chains are filed to 10 degree angle.
Granberg ripping chains in pitch 404 and 38 are filed to 10 degree angle. Oregon recommends running them at 015 to 025 depending on the size of the wood being cut the saw being used and so on. Looks like ill start milling in two weeks.
The depth gauge height is different on this chain too. There are 3 different kinds of chainsaw chain. I first two teeth are left alone a right and left the next two teeth the top places are removed a right and left.
Granberg ripping chain pitch 325 you must sharpen to 0 zero degree on bigger teeth and 20 degree on smaller teeth.
Rapco Industries Carbide Chainsaw Chain
Super Saw Pro Chainsaw Angle Grinder Attachment