Click the link below and get directions to your closest sherwin williams store. The stain really brought out the wood grain and the coat help increase the contrast between the dark ridges and the in between ridges.
Clear Latex Paint For Wood Image Titled Strip From Step 7 Coat Over
Teak Finish Wood Finish Store
Minwax Fruitwood On Pine Stain Applied Sealer And Clear Coat
If you dont apply some kind of sealer the wood will be dried out and lifeless.
Clear coat over wood stain. When you rub stain into wood it brings out the grain. Whether you choose to stain your wood project or not it is important that you protect the wood with a clear finish such as polyurethane. I use two light coats with 220 sanding in between and then a 3rd heavier coat to produce a nice clear finish.
References 2 this old house. Interior stains are generally semi transparent and applied to wood surfaces and then topcoated with a protective clear coating of one type or another. Most clear finishes are available in gloss semi gloss and satin sheens.
Sanding removes the unevenness in the wood. While wood stains add color and bring out the beauty of the wood clear finishes protect the wood and enhance its beauty. Wood stains sealers clear topcoats by sherwin williams.
I was going to sand it back stain it put a clear over it but i suspect the clear may not stick. It also removes all dirt that can prohibit the stain from lasting long. If the clear coat has been scratched through to bare wood you must strip all of the furniture or floor to bare wood before reapplying any stain or clear coat.
Applying a clear sealer or polyurethane over a deck stain will cause more problems than it is worth. Interior stains are unlike exterior stains which are applied with no clear coating on top. How would clear coat go over wood stain.
Stain and a finish are two entirely different things. I am trying to restore an ornate hi chair that is over 100 years old. My coat is benjamin moore stays clear acrylic polyurethane.
Some stains dont work when combined with other stains. Staining over clear coat without sanding is possible but not really recommended. Clear coating are designed to give the bare or stained surface a protective finish.
Then you can apply a clear sealer if that is the look you are going for. If you want a clear finish then you can strip off any old stain and start fresh with bare wood. A stain is intended to darken or color wood by adding pigments but stain does not protect the wood.
Best Wood Stains From Consumer Reports Tests Consumer Reports
How To Clear Coat Laminated Wood Stocks Daily Bulletin
Rust Oleum 902 Wolman Classic Clear Wood Preservative Above Ground