But it would be effectively neutralized by the substituted finish which is unaffected by it. I bought a 2004 musicman stingray5 for approx 800 i live in australia.
5 Common Wood Finishing Problems Thinner Manufacturers Exporters
Lacquer Finish Problem Painting Finish Work Architect Age
Cabinet Door Finish Failure Diagnosis And Repair
They are about 02mm height and can be recognised if you touch them.
Lacquer finish problems. When it arrived i found that on the back side of the body there are wave like lines in lacquer finish. Poor adhesion new lacquer cracking off of corners. To fix rub with fine steel wool.
How to repair a lacquer finish 1 spray a wet coat of pure lacquer thinner on a surface that has cracks orange peel or roughness. I use one coat of sealer and one coat of finish usually satin 40 to 60 sheen. 3 bleed the air lines of the spray gun and wipe moisture from the.
The shellacs obviously not as durable as pre cat. I have a hvlp paint sprayer but was worried about difficulty painting the different edges of this project without getting runs etc. Whatever is inside the panel will still be there.
See picture at top to avoid wait for a drier day. I would suggest that the easiest solution would be to strip that one panel and just use shellac to refinish it from beginning to end. A milky whiteness that appears in a lacquer or shellac finish on a humid day within seconds after application.
I apply the final coat as heavy as i possibly can without runs or sags. To fix mist on the retarder. I primed with two coats and thought i could try lacquer based spray paint in a can since it is a small project.
Finish lacks durability and rubs chips or flakes off easily. They affect aprox 13 of the back of the body and you can draw in almost perfect rectangle around them. This is my first time to try a lacquer finish.
Sealer is basically lacquer with a paste that allows for easier sanding. 2 add a retarding agent to the thinner to correct blushing a condition whereby trapped moisture. First coat flakes off with fingernail and edges or corners chip off easily with minor impact or bumps.
To avoid add lacquer retarder for shellac use butyl cellosolve. Make sure you stir it every 20 minutes because the paste will settle on the bottom. Since this bass doesnt have a lacquer finish unless it was refinished at some point we should really be talking about finish problems or poly finish problems which might lead to a different.
Just trying to saythe title of the thread is lacquer finish problems which may get people looking for problems that are particular to nitro.
Plagued By Lacquer Orange Peel Woodweb S Finishing Forum
Fish Eye Silicone Or The Problem With Furniture Polish
Easy Hand Rubbed Lacquer Finish