website hit counter

Veritas Honing Guide Instructions

In Wood 27 views

The key to consistent and fast honing is repeatability and this guide delivers it in spades. Setting the honing guide.

Veritas Mk Ii Honing Guide Tools And Consumables Projectguitar Com

Mortise Chisel Adapter For Veritas Mk Ii Narrow Blade Honing Guide

Veritas Mkii Honing Guide Narrow Blade Head The Knowledge Blog

This honing guide can be set to one of three bevel angle configurations.

Veritas honing guide instructions. The great advantage of this system is that it has everything you need to precisely set primary bevel angles for high angle and standard angle blades. These are numbered and color coded for clarity and ease of use see figure 3. Includes standard clamping head straight roller base and angle registration jig.

Ii can handle almost any chisel or plane iron and enables you to get the same results with every sharpening quickly and easily. One of the most popular honing guides around the veritas mkii is now available in a deluxe set which includes the standard and narrow blade heads as well as the angle registration jig a. If the stone is very hollow you can take a big grain size as 80 or 120 and then a finer type to improve the surface.

These are numbered and color coded for clarity and ease of use see figure 3. Included is a blade registration jig which slides onto the guide body centering and squaring the blade with the integral fence ensuring accuracy. This veritas mkii honing guide is an all in one system for sharpening edge cutting tools.

Introduction to using the veritas sharpening system. Position 1 red for high angles position 2 yellow for standard angles and. An unbeatable honing guide.

The standard blade carrier can be set to one of three bevel angle con gurations while the narrow blade carrier can be set to one of two bevel angle con gurations. Setting the honing guide. Veritas mkii standard honing guide.

Mkii honing guides from veritas tools. An extremely versatile and precise guide the mk. Ii honing guide takes the difficulty and guesswork out of sharpening chisels and plane irons.

Veritas have redesigned their original honing guide starting from first principles increasing its. Ii will set bevel angles from 150 to 540 and back bevels from 100 to 200 and it will accommodate blades from 14 to 2 78 in width. Position 3 green for back bevels.

A possibility is to use wet or dry sandpaper placing it wet on a plate of glass or other plane surface where it will cling. I know theres been a lot of discussion re sharpening but as a newbie learning how to do it thought id ask a fresh question i bit the bullet and bought a veritas honing guide angle jig for sharpening chisels.

Veritas Tools Sharpening Mortise Chisel Adapter For Mk Ii Narrow

Woodriver Honing Guide Wood Magazine

Veritas Mk Ii Honing Guide

Tags: #veritas honing guide instructions

Veritas Honing Guide
Veritas Honing Guide
Lee valley offers high quality woodworking tools
Must read×